Vanderbilt CDC0402 Pos Pan tilt
Technical Specification
- Make: Vanderbilt
- Model code: CDC0402 Pos
- Voltage: 230 VAC
- Protection: IP67
- Dimensions mm: 300 x 175 x 320
Control units are required for operating pan-and-tilt drives as the control commands from the control centre must be converted into electrical signals for the motors in the pan-and-tilt drive. The two CDC0401 and CDC0402 control units are particularly suitable for operation of pan-and-tilt drives with a power supply of 24 VAC or 230 VAC. The control units are driven via the SIMATRIX matrix range or the SUT48 keyboard. As the protocol is compatible with the SCU301 and SCU302 control units, extension of existing SIMATRIX systems by the two control units from this economy line is easily possible. Baud rate: 600 ~ 19,200 bits/s. Also includes position control for zoom/focus and pan/tilt for 14 stored preset positions. Automatic position cycle can be programmed and recalled.
Read moreMake | Vanderbilt |
---|---|
Manufacturer | Vanderbilt Industries |
Category | Video Surveillance>Pan tilts |
Model code | CDC0402 Pos |
Electrical Specifications | Voltage: 230 VAC |
Environmental Specifications | Protection: IP67 |
Physical Specifications | Dimensions mm: 300 x 175 x 320 |
Accessories | Power Supply Unit / Telemetry Control Unit |
Additional info | Control units are required for operating pan-and-tilt drives as the control commands from the control centre must be converted into electrical signals for the motors in the pan-and-tilt drive. The two CDC0401 and CDC0402 control units are particularly suitable for operation of pan-and-tilt drives with a power supply of 24 VAC or 230 VAC. The control units are driven via the SIMATRIX matrix range or the SUT48 keyboard. As the protocol is compatible with the SCU301 and SCU302 control units, extension of existing SIMATRIX systems by the two control units from this economy line is easily possible. Baud rate: 600 ~ 19,200 bits/s. Also includes position control for zoom/focus and pan/tilt for 14 stored preset positions. Automatic position cycle can be programmed and recalled. |
Download PDF version Download PDF version |