Home  |  Settings  |  Marketing Options  |  About Us  |  FAQs    Join SourceSecurity.com on LinkedIn
Detailed technical specifications of Micron MTFDDAK128MBD-1AK12ITYY, one of over 8 Storage from Micron
  • Technical spec

Micron 128GB Industrial SSD MTFDDAK128MBD-1AK12ITYY

Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: Micron Technology, Inc. Micron Technology, Inc.Download DatasheetDownload Datasheet
Micron MTFDDAK128MBD-1AK12ITYY Storage
Storage typeSSD
Capacity128 GB
InterfaceSATA III (6 Gb/s)
Length100.45 mm
Width69.85 mm
Height7 mm
Operating temperature-40 ~ +85 C (-40 ~ +185 F)
EncryptionSelf-Encrypting Drive
Read/write rates500MB/s (Read), 130MB/s (Write)
Model Info

Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and eight channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.

The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability.

The self-encrypting drive (SED) features a FIPS-compliant, AES-256 encryption engine, providing hardware-based, secure data encryption, with no loss of SSD performance. This SED follows the TCG/Opal specification for trusted peripherals.

When TCG/Opal features are not enabled, the device can perform alternate data encryption by invoking the ATA security command set encryption features, to provide full-disk encryption (FDE) managed in the host system BIOS. TCG/Opal and ATA security feature sets cannot be enabled simultaneously.

The data encryption is always running; however, encryption keys are not managed and the data is not secure until either TCG/Opal or ATA security feature sets are enabled.

Where to Buy? Click here

Download Technical spec

Product News


See privacy and cookie policy