Honeywell Video Systems HCD544PVX True Day/night High Resolution Colour Camera With 540 TVL

Technical Specification

Features:

Make: Honeywell Security
Model code: HCD544PVX
Chip Inch Size ": 1/3
Color Type: Color / Monochrome
Resolution TVL: 540

Additional info:

The Honeywell HCD544PVX true day/night camera is ideally suited for use in 24/7 surveillance applications. The HCD544PVX adapts to varying lighting conditions to ensure the highest quality picture even in very low light. When the light level drops too low for accurate video identification in colour, the camera automatically moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CCD to IR light. The camera uses internal logic or an external LAMP connector to control the switchoverfrom colour to black and white. This improves the reliability of the operation of the camera in difficult installations or lighting conditions.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Honeywell Security
Manufacturer	Honeywell
Category	Video Surveillance>Surveillance cameras
Model code	HCD544PVX
Chip Inch Size "	1/3
Color Type	Color / Monochrome
Resolution TVL	540
Digital (DSP)	Yes
Auto Iris	Yes
Sensitivity lux	0.1 @ F1.2
Direct Drive	Yes
Lens Mount	C/CS
Electrical Specifications	Voltage: 12 V DC, 24 V AC Power Consumption: 4.5 W
Focal Length mm	5.0 ~ 50
Mount Type	Wall / Ceiling
Picture Elements HxV	752 x 582
Back Light Compensation	Yes
Auto Gain Control	Yes
White Balance	Yes
Electronic Shutter range	1/50 ~ 1/100,000
S/ N (Signal/ Noise) Ratio dB	50
Synchronisation	Line-lock
Signal Mode	PAL
Video Output	1 Vp-p, 75 Ohms
Physical Specifications	Weight g: 500
Environmental Specifications	Operating Temperature ^oC: -10 ~ +50 Protection: Weather Resistant Operating Humidity %: 0 ~ 85
Additional info	The Honeywell HCD544PVX true day/night camera is ideally suited for use in 24/7 surveillance applications. The HCD544PVX adapts to varying lighting conditions to ensure the highest quality picture even in very low light. When the light level drops too low for accurate video identification in colour, the camera automatically moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CCD to IR light. The camera uses internal logic or an external LAMP connector to control the switchoverfrom colour to black and white. This improves the reliability of the operation of the camera in difficult installations or lighting conditions.
Download PDF version Download PDF version