SALTO WRADAPT Access Control Reader Accessory With Dip Switches Configuration To Interface With The External Device

Technical Specification

Features:

Make: SALTO
Model code: WRADAPT
Accessories: Reader Adaptor

Additional info:

With the SALTO Wall Reader Adaptor, it's possible to integrate with third party devices such as time and attendance, POS etc. The Wall Reader Adaptor is designed to read data from the RW carriers and send this to an external device. It is connected on one side to any SALTO Wall Reader, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND. Configuration by dip switches to control data to be read and the interface with the external device. Voltage required: from 7 to 15V from the external device. Can also be optionally powered through the jack connector. Connection to the reader: UTP CAT5 cable. Connection to the external device: 4 pins block terminal. Data read by the WRADAPT: ROM CODE, TRACKS ON KEY, WIEGAND CODE.

Contact manufacturer Contact manufacturer

Make	SALTO
Manufacturer	SALTO Systems
Category	Access Control>Access control readers
Model code	WRADAPT
Accessories	Reader Adaptor
Additional info	With the SALTO Wall Reader Adaptor, it's possible to integrate with third party devices such as time and attendance, POS etc. The Wall Reader Adaptor is designed to read data from the RW carriers and send this to an external device. It is connected on one side to any SALTO Wall Reader, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND. Configuration by dip switches to control data to be read and the interface with the external device. Voltage required: from 7 to 15V from the external device. Can also be optionally powered through the jack connector. Connection to the reader: UTP CAT5 cable. Connection to the external device: 4 pins block terminal. Data read by the WRADAPT: ROM CODE, TRACKS ON KEY, WIEGAND CODE.
Download PDF version Download PDF version