Home  |  Settings  |  Marketing Options  |  About Us  |  FAQs    Join SourceSecurity.com on LinkedIn
Detailed technical specifications of Vanderbilt AP01M-2420, one of over 36 Access control controllers from Vanderbilt
  • Technical spec
Please note: This product model is not available in this region

Vanderbilt AP01M-2420 Door Modules - AP01P+24V PSU, Metal Cabinet

Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: Vanderbilt Industries Vanderbilt Industries
Vanderbilt AP01M-2420 Access control controller
Model CodeAP01M-2420
SeriesAliro Door Controller + 24v PSU
Max No. of Doors per Controller1
No of Cardholders10 000
Electrical SpecificationsVoltage: 100 ~ 240 V AC
Physical SpecificationsDimensions mm: 355 x 330 x 85
Weight g: 4,000
Environmental SpecificationsOperating Temp oC: -10 ~ +40 C (14 ~ 104 F)
Operating Humidity %: 0 ~ 75
Model Info

The AP01M-2420 is used when is a complete, easy-to-use door control is required.

The AP01M-2420 is a compiled product consisting of the following:
- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable
- One mounted Aliro AP Access Point Controller PCB
- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage.

The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.
A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.

Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition.

Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.

Operational time Example 1, 24V: One AP + one reader AR40S-MF + 24V lock strike plate (current 0.35A). Door set unlocked. Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.

Operational time Example 2, 24V: Same as above but using a valid card every 10 seconds (current 0.30-0.40A). Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.

Download Technical spec

Product News


See privacy and cookie policy