NVT NV-862R CCTV hard-wired transmission system

Technical Specification

Please note: this is a discontinued product.

Go to Replacement product

Features:

Make: NVT Phybridge
Model code: NV-862R
Transmission type: UTP / CAT 5
Video Inputs: 8
TX/RX: RX

Additional info:

Full-motion monochrome or color video receiver for distances up to: 3,000ft (1km) when used with NV-213A, NV-213A-M, NV-813A, or NV-1613A 5,280ft 1 mile (1,6km) when used with NV-653T transmitter and Cat-2 or 3 wire 8,000ft 1.5 miles (2,4km) when used with NV-653T transmitter and Cat-5 wire. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Rack mountable.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	NVT Phybridge
Manufacturer	NVT Phybridge
Category	Video Surveillance>Analog Transmission
Model code	NV-862R
Transmission type	UTP / CAT 5
Video Inputs	8
TX/RX	RX
Video Outputs	8
Transmission Range m	1000
Physical Specifications	Weight g: 2.2 kg Dimensions mm: 430 x 45 x 200
Environmental Specifications	Operating Temp ^oC: 0-50
Additional info	Full-motion monochrome or color video receiver for distances up to: 3,000ft (1km) when used with NV-213A, NV-213A-M, NV-813A, or NV-1613A 5,280ft 1 mile (1,6km) when used with NV-653T transmitter and Cat-2 or 3 wire 8,000ft 1.5 miles (2,4km) when used with NV-653T transmitter and Cat-5 wire. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Rack mountable.
Download PDF version Download PDF version