NVT NV-652R Single Channel Active Receiver

Technical Specification

Please note: this is a discontinued product.

Go to Replacement product

Features:

Make: NVT Phybridge
Model code: NV-652R
Transmission type: UTP / CAT 5
Video Inputs: 1
TX/RX: RX

Additional info:

Mono or colour non-amplified video receiver up to 2.4 km with Cat-5 wire to be used with NVT NV-213A/A-M Video Transceiver or NV-653T Video Transmitter. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Up to 10 NV-652 Rs may be rack mounted using the NV-RM8/10 Rack Panel Kit. Supports screw-terminal UTP video inputs. Distances up to 3000 ft with passive transceiver.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	NVT Phybridge
Manufacturer	NVT Phybridge
Category	Video Surveillance>Analog Transmission
Model code	NV-652R
Transmission type	UTP / CAT 5
Video Inputs	1
TX/RX	RX
Telemetry Control	Yes
Pre & Post Alarm Image Buffer	Yes
Video Outputs	1
Transmission Range m	300
Physical Specifications	Weight g: 100 Dimensions mm: 76 x 39 x 28
Environmental Specifications	Operating Temp ^oC: 0 ~ 50
Additional info	Mono or colour non-amplified video receiver up to 2.4 km with Cat-5 wire to be used with NVT NV-213A/A-M Video Transceiver or NV-653T Video Transmitter. Network Wiring: One Unshielded Twisted Pair 24 AWG (0,5 mm) or thicker. Impedance: 100 ± 20 ohms. Built-in transient protection & ground lifting. Built-in brightness & sharpness controls; blue power LED, green active LED. Compatible with qualified UTP cameras. Up to 10 NV-652 Rs may be rack mounted using the NV-RM8/10 Rack Panel Kit. Supports screw-terminal UTP video inputs. Distances up to 3000 ft with passive transceiver.
Download PDF version Download PDF version